4x4 Assembly instruction

In this video you will learn how to assemble the "4x4" - wooden mechanical model by Wooden.City. Product page: https://wooden.city/product/jeep/?lang=en You will need: stationery knife, scissors, sand paper and wax candle. Very carefully push out the details from the obverse side of the board, trying not to break them. If the detail does not come out, gently cut the jumpers with the stationary knife. This model is assembled with no glue and does not require the painting. To prevent seizure and to reduce friction the gear face and the axle rotation areas should be waxed. It is recommended to assemble the model with good lighting and to strictly follow the instructions. Use timecodes to navigate: «3:30 – assembly of crankshaft» «16:40 – assembly of engine» «30:23 – installation of the engine on the base» «32:55 – installation of suspension elements» «38:28 – transmission assembly» «52:50 – installation of transmission» «54:23 – assembly of housing elements» «1:10:00 – main gears building» «1:27:33 – gearbox assembly» «1:49:00 – trailer hook assembly» «1:56:10 – drive/stop switch assembly» «1:59:44 – main mechanism installation» «2:05:42 – steering column assembly» «2:16:40 – pedals assembly» «2:25:47 – transmission installation» «2:25:47 – steering column installation» «2:38:32 – pedals installation» «2:42:33 – ratchet build» «3:02:53 – winding up build» «3:43:34 – seat building» «3:47:51 – hood and sides building» «4:29:27 – windshield assembly» «4:31:55 – functional check of the winding mechanism» «4:32:22 – assembly back wheels with suspension» «5:18:00 – assembly front wheels with suspension» «6:15:30 – wheels installation» «6:35:15 – installation of trench tools» «6:38:21 – full model test» Thanks for watching

Category